Bimmer Flasher30/10/2023
Update for the BimmerFlasher has been released, v1.11
Added a new module for Siemens MSV80.
Added communication protocol for Siemens MS45 via CAN bus.
Added calculation for MO3 checksums for MS45.
Added compatibility checks before writing, for all modules except ME7.2 and MSS50.
Improved writing speed for MS41, MS42 and MS43.
Last used module will be pre-selected in the carousel for next usage.
Changed hold duration for operation cancel to 500ms.
Other improvements for modules.
Stability and UX improvements.
Updated FTDI driver library.
Tune it !
Update for the BimmerFlasher has been released, v1.11
Added a new module for Siemens MSV80.
Added communication protocol for Siemens MS45 via CAN bus.
Added calculation for MO3 checksums for MS45.
Added compatibility checks before writing, for all modules except ME7.2 and MSS50.
Improved writing speed for MS41, MS42 and MS43.
Last used module will be pre-selected in the carousel for next usage.
Changed hold duration for operation cancel to 500ms.
Other improvements for modules.
Stability and UX improvements.
Updated FTDI driver library.
Tune it !
Black Friday24/11/2022
Hi all, it's Black Friday again !
What: 50% discount !
When: 24.11 - 30.11 !
How: Enter "BLACK_FRIDAY" code !
Tune it !
Hi all, it's Black Friday again !
What: 50% discount !
When: 24.11 - 30.11 !
How: Enter "BLACK_FRIDAY" code !
Tune it !
Update + restore for online orders29/09/2022
New version of BimmerEditor is released, added custom definition manager.
So in case some map is missing in any module - you can define it by your self !
Many internal improvemenets and fixes to few modules.
We have restored ability to place an order on-site.
Stay tuned !
New version of BimmerEditor is released, added custom definition manager.
So in case some map is missing in any module - you can define it by your self !
Many internal improvemenets and fixes to few modules.
We have restored ability to place an order on-site.
Stay tuned !
Order details09/07/2022
We temporary paused automatic order placing due to migration to another environment.
If you want to buy the application\modules please reach us via email - contact@bmweditor.com
Stay tuned !
We temporary paused automatic order placing due to migration to another environment.
If you want to buy the application\modules please reach us via email - contact@bmweditor.com
Stay tuned !
Super sale09/10/2021
Hey tuners !
Super sale has been started. Until end of this year we won't charge cost for the BimmerEditor app, only for a modules you need. That means that for almost all DIY tuners final price will be reduced twice.
Stay tuned !
Hey tuners !
Super sale has been started. Until end of this year we won't charge cost for the BimmerEditor app, only for a modules you need. That means that for almost all DIY tuners final price will be reduced twice.
Stay tuned !
Bimmer Flasher released24/08/2021
Hi all !
We have just released Bimmer Flasher mobile app for the Android platform.
In initial release we decided to put the most interesting ECUs : Bosch ME7.2 and Siemens MS45.
Now you can read and write (with automatic checksum correction) calibrations directly from your phone, without needs to take a laptop.
The same with engine error codes - reading and clearing are there.
Only OTG adapter and K-Line cable are needed.
Reading calibration data and engine errors are free, writing calibration data and clearing engine errors requires one-time module unlock, that costs only 5$ like a coffee cup ;)
PS. 5$ is time limited offer :)
Tune it !
Hi all !
We have just released Bimmer Flasher mobile app for the Android platform.
In initial release we decided to put the most interesting ECUs : Bosch ME7.2 and Siemens MS45.
Now you can read and write (with automatic checksum correction) calibrations directly from your phone, without needs to take a laptop.
The same with engine error codes - reading and clearing are there.
Only OTG adapter and K-Line cable are needed.
Reading calibration data and engine errors are free, writing calibration data and clearing engine errors requires one-time module unlock, that costs only 5$ like a coffee cup ;)
PS. 5$ is time limited offer :)
Tune it !
Black Friday21/11/2020
Hi all, it's Black Friday again !
What: 50% discount !
When: 25.11 - 30.11 !
How: Enter "BLACK_FRIDAY" code !
And ... little teaser, new mobile app is coming to help tuners :)
Tune it !
Hi all, it's Black Friday again !
What: 50% discount !
When: 25.11 - 30.11 !
How: Enter "BLACK_FRIDAY" code !
And ... little teaser, new mobile app is coming to help tuners :)
Tune it !
Discount13/05/2020
#StayAtHome discount is ending this week (17.05.2020)
Stay tuned and be safe
#StayAtHome discount is ending this week (17.05.2020)
Stay tuned and be safe
Discount27/03/2020
We support #StayAtHome challenge and giving 50% discount for our software.
Use #StayAtHome coupon code to get discount
Stay tuned
We support #StayAtHome challenge and giving 50% discount for our software.
Use #StayAtHome coupon code to get discount
Stay tuned
Update01/12/2019
New update is ready. Changes were to almost all modules, but the most major are for ms45 and me7.2 modules.
MS45:
- Added flasher to read and write calibration data
- Added DTC viewer
- Added 4 version definitions, so now all sw versions are supported (for both 45.0 and 45.1)
ME7.2:
- Flasher improvements
- Added DTC viewer
Tune it !
New update is ready. Changes were to almost all modules, but the most major are for ms45 and me7.2 modules.
MS45:
- Added flasher to read and write calibration data
- Added DTC viewer
- Added 4 version definitions, so now all sw versions are supported (for both 45.0 and 45.1)
ME7.2:
- Flasher improvements
- Added DTC viewer
Tune it !
Black Friday29/11/2019
Hi all, it's Black Friday time !
What: 50% discount !
When: 29.11 - 02.12 !
How: Enter "BLACK_FRIDAY" code !
Tune it !
Hi all, it's Black Friday time !
What: 50% discount !
When: 29.11 - 02.12 !
How: Enter "BLACK_FRIDAY" code !
Tune it !
Easter discount24/04/2019
Special discount till the end of April -25%
Use "TIME_TO_TUNE" coupon code.
Stay tuned
Special discount till the end of April -25%
Use "TIME_TO_TUNE" coupon code.
Stay tuned
Black Friday15/11/2018
Black Friday is almost here ! We offer 50% discount for BimmerEditorPro & modules.
All you need is to enter the "BLACK_FRIDAY" coupon on the order page to get that discount, it will work ONLY 21-26 November 2018.
Tune it !
Black Friday is almost here ! We offer 50% discount for BimmerEditorPro & modules.
All you need is to enter the "BLACK_FRIDAY" coupon on the order page to get that discount, it will work ONLY 21-26 November 2018.
Tune it !
News30/07/2018
New version is released. Added flasher to Bosch me7.2 module, so now you are able to read\write and tune from BimmerEditor.
Also implemented new feature for BimmerEditor: notes for any map
Tune it !
New version is released. Added flasher to Bosch me7.2 module, so now you are able to read\write and tune from BimmerEditor.
Also implemented new feature for BimmerEditor: notes for any map
Tune it !
Black Friday18/11/2017
And again Black Friday is coming ! As you know we offer 50% discount for BimmerEditorPro & modules.
Just enter the "BLACK_FRIDAY" coupon on the order page to get discount, it will work ONLY 24-27 November 2017. So don't miss :)
PS. Questions ? Ask !
And again Black Friday is coming ! As you know we offer 50% discount for BimmerEditorPro & modules.
Just enter the "BLACK_FRIDAY" coupon on the order page to get discount, it will work ONLY 24-27 November 2017. So don't miss :)
PS. Questions ? Ask !
New module20/09/2017
New Siemens MS45 module for BimmerEditorPro is ready.
Tune it !
New Siemens MS45 module for BimmerEditorPro is ready.
Tune it !
New module22/03/2017
New Bosch ME7.2 module for BimmerEditorPro is ready.
Tune it !
New Bosch ME7.2 module for BimmerEditorPro is ready.
Tune it !
Black Friday18/11/2016
Black Friday is coming ! As usually we will offer you 50% discount for BimmerEditorPro & modules.
You should enter the "BLACK_FRIDAY" coupon on the order page to get it, it'll work 25-28 November 2016.
If any questions - just ask us
Black Friday is coming ! As usually we will offer you 50% discount for BimmerEditorPro & modules.
You should enter the "BLACK_FRIDAY" coupon on the order page to get it, it'll work 25-28 November 2016.
If any questions - just ask us
News18/08/2016
From 20.08.2016 standard version will be stopped for selling. Only Pro version will be available for purchase.
Ms45 module will be moved to Pro version asap.
If you have standard version and would like to upgrade it - feel free to contact support.
Price for Pro is the same as for standard.
From 20.08.2016 standard version will be stopped for selling. Only Pro version will be available for purchase.
Ms45 module will be moved to Pro version asap.
If you have standard version and would like to upgrade it - feel free to contact support.
Price for Pro is the same as for standard.
Discount17/05/2016
Till the end of May we offer 20% discount on BimmerEditor and modules !!
To get discount - contact us !
Till the end of May we offer 20% discount on BimmerEditor and modules !!
To get discount - contact us !
BimmerEditorPro 25/04/2016
New BimmerEditorPro module for Siemens mss50 is ready !
It supports both versions: 50.0 and 50.1. As usual Flasher, Logger and DTC viewer presents.
New BimmerEditorPro module for Siemens mss50 is ready !
It supports both versions: 50.0 and 50.1. As usual Flasher, Logger and DTC viewer presents.
BimmerEditorPro 04/04/2016
And new update ... new BimmerEditorPro module ... Siemens mss52 is out !
And new update ... new BimmerEditorPro module ... Siemens mss52 is out !
BimmerEditorPro 30/03/2016
New BimmerEditorPro module for Siemens mss54 is ready !
Flasher, Logger, DTC Viewer and other as usual are on-board !
In few days we'll release mss50&mss52 for public.
New BimmerEditorPro module for Siemens mss54 is ready !
Flasher, Logger, DTC Viewer and other as usual are on-board !
In few days we'll release mss50&mss52 for public.
Black Friday & Cyber Monday Discount !26/11/2015
We are happy to offer you 50% "black friday" discount on BimmerEditor & BimmerEditorPro !
You should enter the "BLACK_FRIDAY" coupon on the order page to get it, it'll work 27-30 November 2015.
We are happy to offer you 50% "black friday" discount on BimmerEditor & BimmerEditorPro !
You should enter the "BLACK_FRIDAY" coupon on the order page to get it, it'll work 27-30 November 2015.
BimmerEditorPro 06/11/2015
New BimmerEditorPro module for Siemens ms43 is ready !
Flasher and other as usual are on-board !
New BimmerEditorPro module for Siemens ms43 is ready !
Flasher and other as usual are on-board !
BimmerEditor update details:16/10/2015
Siemens MS45 module (ver 1.02)
- Added support of new firmware version
Siemens MSS54 module (ver 1.02)
- Added maf table
Siemens MS45 module (ver 1.02)
- Added support of new firmware version
Siemens MSS54 module (ver 1.02)
- Added maf table
BimmerEditorPro 14/10/2015
Added logger and additional maps to ms42 module.
Added some maps to 413&506 modules.
Minor changes in ms41 module.
Module for ms43 will be ready very soon !d
Added logger and additional maps to ms42 module.
Added some maps to 413&506 modules.
Minor changes in ms41 module.
Module for ms43 will be ready very soon !d
BimmerEditorPro 25/09/2015
New BimmerEditorPro module for Siemens ms42 is ready !
Ecu flasher & engine dtc viewer are on-board
New BimmerEditorPro module for Siemens ms42 is ready !
Ecu flasher & engine dtc viewer are on-board
BimmerEditorPro 03/09/2015
New BimmerEditorPro modules for Bosch 413 and 506 are ready !
New BimmerEditorPro modules for Bosch 413 and 506 are ready !
BimmerEditorPro 15/08/2015
For those of you who are using BimmerEditor with ms41 module we can offer to try BimmerEditorPro and write feedback in case when your support period doesn't expire yet.
For those of you who are using BimmerEditor with ms41 module we can offer to try BimmerEditorPro and write feedback in case when your support period doesn't expire yet.
Hi 28/07/2015
We are happy to tell you about our new BimmerEditorPro version
It's next generation of our BimmerEditor! It includes a lot of new features:
• project & versions control
• extended compare
• copy\paste
• map axis edit
• extended content control
• multi language interface
• auto update
• working with any K-Line cable based on FTDI chips
• reading\writing calibration from ecu
• reading\clearing errors from ecu
• reading live data from ecu
• clearing adaptations
At this moment we are finishing testing with module ms41. Please contact us as soon as you would like to join beta testing
We have also added a Facebook page for our product where you may ask questions and communicate with society BimTun Facebook
We are happy to tell you about our new BimmerEditorPro version
It's next generation of our BimmerEditor! It includes a lot of new features:
• project & versions control
• extended compare
• copy\paste
• map axis edit
• extended content control
• multi language interface
• auto update
• working with any K-Line cable based on FTDI chips
• reading\writing calibration from ecu
• reading\clearing errors from ecu
• reading live data from ecu
• clearing adaptations
At this moment we are finishing testing with module ms41. Please contact us as soon as you would like to join beta testing
We have also added a Facebook page for our product where you may ask questions and communicate with society BimTun Facebook
Discount16/06/2015
It's summertime !! Don't miss 20% discount on BimmerEditor and modules !!
You should enter the "SUMMERTIME" coupon on the order page to get it, it'll work only in June 2015.
It's summertime !! Don't miss 20% discount on BimmerEditor and modules !!
You should enter the "SUMMERTIME" coupon on the order page to get it, it'll work only in June 2015.
BimmerEditor update details:02/06/2015
BimmerEditor application (ver 1.15) :
- Fixed minor bugs and made little optimization.
Siemens MS41 module (ver 1.08)
- Changed units in maf table
Siemens MS42 module (ver 1.05)
- Changed units in maf table
Siemens MS43 module (ver 1.04)
- Added support of new firmware version
- Changed units in maf table
BimmerEditor application (ver 1.15) :
- Fixed minor bugs and made little optimization.
Siemens MS41 module (ver 1.08)
- Changed units in maf table
Siemens MS42 module (ver 1.05)
- Changed units in maf table
Siemens MS43 module (ver 1.04)
- Added support of new firmware version
- Changed units in maf table
BimmerEditor update details:30/03/2015
BimmerEditor application (ver 1.14) :
Siemens MS41 module (ver 1.07)
- Added lambda correction maps
- Added new dwell map
- Added rpm limiter map on abs failure
- Added maf related maps
- Added minimal injection time map
Siemens MS42 module (ver 1.04)
- Added new dwell map
- Added rpm limiter map on abs failure
- Added maf related maps
- Added minimal injection time map
Siemens MS43 module (ver 1.03)
- Added rpm limiter map on abs failure
- Added maf related maps
- Added minimal injection time map
BimmerEditor application (ver 1.14) :
Siemens MS41 module (ver 1.07)
- Added lambda correction maps
- Added new dwell map
- Added rpm limiter map on abs failure
- Added maf related maps
- Added minimal injection time map
Siemens MS42 module (ver 1.04)
- Added new dwell map
- Added rpm limiter map on abs failure
- Added maf related maps
- Added minimal injection time map
Siemens MS43 module (ver 1.03)
- Added rpm limiter map on abs failure
- Added maf related maps
- Added minimal injection time map
BimmerEditor update details:29/01/2015
BimmerEditor application (ver 1.13) :
Siemens MS42 module (ver 1.03):
- Added new dwell map
Siemens MS45 module (ver 1.01):
- Added support for new firmware version
BimmerEditor application (ver 1.13) :
Siemens MS42 module (ver 1.03):
- Added new dwell map
Siemens MS45 module (ver 1.01):
- Added support for new firmware version
BimmerEditor update details:26/01/2015
BimmerEditor application (ver 1.12) :
Siemens MS41 module (ver 1.06):
- Added maf related maps
- Added rpm limiter map on abs failure. Useful for engine swap into e30.
BimmerEditor application (ver 1.12) :
Siemens MS41 module (ver 1.06):
- Added maf related maps
- Added rpm limiter map on abs failure. Useful for engine swap into e30.
Discount15/12/2014
Hello guys,
Nowadays is one year as we have published our product. During this year we worked hard to implement a lot of new features and increase support for the number of different devices. It was good time and we want you to be happy together with us. We offer your 25% discount for one month, use "ONE_YEAR" as a the coupon code.
Mary Christmas and Happy New Year!!!
BimmerEditor Team.
Hello guys,
Nowadays is one year as we have published our product. During this year we worked hard to implement a lot of new features and increase support for the number of different devices. It was good time and we want you to be happy together with us. We offer your 25% discount for one month, use "ONE_YEAR" as a the coupon code.
Mary Christmas and Happy New Year!!!
BimmerEditor Team.
Update & discount27/11/2014
We are happy to offer you 50% "black friday" discount on BimmerEditor !
You should enter the "BLACK_FRIDAY" coupon on the order page to get it, it'll work only during 28 November 2014.
BimmerEditor update details:
BimmerEditor application (ver 1.11) :
- Added import feature, that allows compare files.
- Fixed minor bugs.
- Added support for Siemens MS45 module
Siemens MS45 module (ver 1.00):
- Initial release
We are happy to offer you 50% "black friday" discount on BimmerEditor !
You should enter the "BLACK_FRIDAY" coupon on the order page to get it, it'll work only during 28 November 2014.
BimmerEditor update details:
BimmerEditor application (ver 1.11) :
- Added import feature, that allows compare files.
- Fixed minor bugs.
- Added support for Siemens MS45 module
Siemens MS45 module (ver 1.00):
- Initial release
BimmerEditor update details:22/09/2014
BimmerEditor application (ver 1.10) :
- Increased size of recent files list.
- Improved open\save file dialog to remember last directory.
Bosch 413 module (ver 1.01):
- Added injectors scaling map
Siemens MS43 module (ver 1.02):
- Added additional RPM limitation maps
BimmerEditor application (ver 1.10) :
- Increased size of recent files list.
- Improved open\save file dialog to remember last directory.
Bosch 413 module (ver 1.01):
- Added injectors scaling map
Siemens MS43 module (ver 1.02):
- Added additional RPM limitation maps
BimmerEditor update details:17/09/2014
BimmerEditor application (ver 1.09) :
- Added support for Bosch 413 module
Bosch 413 module (ver 1.00):
- Initial release
BimmerEditor application (ver 1.09) :
- Added support for Bosch 413 module
Bosch 413 module (ver 1.00):
- Initial release
BimmerEditor update details:28/08/2014
BimmerEditor application (ver 1.08) :
- Added functionality to work with Diagnostic Trouble Codes (DTC)
- Minor application optimization
Siemens MSS52 module (ver 1.01):
- Added support for DTC
Siemens MSS54 module (ver 1.01):
- Added support for new firmware version
- Added support for DTC
BimmerEditor application (ver 1.08) :
- Added functionality to work with Diagnostic Trouble Codes (DTC)
- Minor application optimization
Siemens MSS52 module (ver 1.01):
- Added support for DTC
Siemens MSS54 module (ver 1.01):
- Added support for new firmware version
- Added support for DTC
BimmerEditor update details:22/07/2014
BimmerEditor application (ver 1.07) :
- Added support for Siemens MSS52 module
Siemens MSS52 module (ver 1.00):
- Initial release
BimmerEditor application (ver 1.07) :
- Added support for Siemens MSS52 module
Siemens MSS52 module (ver 1.00):
- Initial release
BimmerEditor update details:08/07/2014
BimmerEditor application (ver 1.06) :
- Added support for Siemens MSS54 module
- Fixed bug with coloring elements with negative value
- Application optimization
Siemens MSS54 module (ver 1.00):
- Initial release
BimmerEditor application (ver 1.06) :
- Added support for Siemens MSS54 module
- Fixed bug with coloring elements with negative value
- Application optimization
Siemens MSS54 module (ver 1.00):
- Initial release
BimmerEditor update details:03/06/2014
BimmerEditor application (ver 1.05) :
- Added ability to work with recent files more easily
- Fixed minor bug with classic windows style
- Application optimization
Siemens MS41 module (ver 1.05):
- Added additional knock detection maps
BimmerEditor application (ver 1.05) :
- Added ability to work with recent files more easily
- Fixed minor bug with classic windows style
- Application optimization
Siemens MS41 module (ver 1.05):
- Added additional knock detection maps
30/05/2014
We are going to release new module for Siemens MS45.
If you are interested in this module and want to be sure about supporting your version, please feel free to send us your firmware to verify that initial release support it.
Contact email - support[at]bmweditor.com
BimmerEditor Team.
We are going to release new module for Siemens MS45.
If you are interested in this module and want to be sure about supporting your version, please feel free to send us your firmware to verify that initial release support it.
Contact email - support[at]bmweditor.com
BimmerEditor Team.
Easter discount:18/04/2014
We have added coupon for 20% discount for BimmerEditor and all modules on Easter holidays.
Coupon code is "EASTER_WITH_BE" (without quotes). It will work only from 18.04 till 23.04.2014
BimmerEditor Team.
We have added coupon for 20% discount for BimmerEditor and all modules on Easter holidays.
Coupon code is "EASTER_WITH_BE" (without quotes). It will work only from 18.04 till 23.04.2014
BimmerEditor Team.
BimmerEditor update details:24/03/2014
BimmerEditor application (ver 1.04) :
Siemens MS42 module (ver 1.02):
- Added DISA control maps
Siemens MS43 module (ver 1.01):
- Added DISA control maps
- Fixed address of MAF map for some version
BimmerEditor application (ver 1.04) :
Siemens MS42 module (ver 1.02):
- Added DISA control maps
Siemens MS43 module (ver 1.01):
- Added DISA control maps
- Fixed address of MAF map for some version
Hello all, 26/02/2014
BimmerEditor update details:
BimmerEditor application (ver 1.03) :
- Added support for Siemens MS43 module
- Fixed minor bugs
- Application optimization
Siemens MS41 module (ver 1.04):
- Added injection correction maps
- Added ignition correction maps
- Minor refactoring of map structure
Siemens MS42 module (ver 1.01):
- Added ignition correction map by temperature
- Minor refactoring of map structure
Siemens MS43 module (ver 1.00):
- Initial release
BimmerEditor update details:
BimmerEditor application (ver 1.03) :
- Added support for Siemens MS43 module
- Fixed minor bugs
- Application optimization
Siemens MS41 module (ver 1.04):
- Added injection correction maps
- Added ignition correction maps
- Minor refactoring of map structure
Siemens MS42 module (ver 1.01):
- Added ignition correction map by temperature
- Minor refactoring of map structure
Siemens MS43 module (ver 1.00):
- Initial release
Hello all, 31/01/2014
BimmerEditor update details:
BimmerEditor application (ver 1.02) :
- Added support for Siemens MS42 module
- Added color visualization for tables
- Added new view to show percent difference for user friendly data
- Fixed minor bugs
- Application optimization
Siemens MS41 module (ver 1.03):
- Added support for new firmware version
- Added injectors scaling maps
- Fixed some factors and offset for user friendly view
Siemens MS42 module (ver 1.00):
- Initial release
BimmerEditor update details:
BimmerEditor application (ver 1.02) :
- Added support for Siemens MS42 module
- Added color visualization for tables
- Added new view to show percent difference for user friendly data
- Fixed minor bugs
- Application optimization
Siemens MS41 module (ver 1.03):
- Added support for new firmware version
- Added injectors scaling maps
- Fixed some factors and offset for user friendly view
Siemens MS42 module (ver 1.00):
- Initial release
Hello all, 06/01/2014
Added support for new firmware version in Siemens MS41 module. Current module version is 1.2.
BIM-Tun team
Added support for new firmware version in Siemens MS41 module. Current module version is 1.2.
BIM-Tun team
Hello all, 28/12/2013
We happy to inform you about new update for application and Siemens MS41 module.
We have added ability to disable EWS, that will help you with SWAP's.
Also there have been added new maps such as: O2 sensors, Secondary Air Injection Pump, Secondary Air Injection Valve, Ignition on ASC.
Minor improvements for optimization and user experience.
Happy New Year :)
So, don't waste time, NY discount will expire in 4 days :)
BIM-Tun team
We happy to inform you about new update for application and Siemens MS41 module.
We have added ability to disable EWS, that will help you with SWAP's.
Also there have been added new maps such as: O2 sensors, Secondary Air Injection Pump, Secondary Air Injection Valve, Ignition on ASC.
Minor improvements for optimization and user experience.
Happy New Year :)
So, don't waste time, NY discount will expire in 4 days :)
BIM-Tun team
Hello all, 04/12/2013
BIM-Tune team was working persistently to create powerful editing firmware tool available for every fan of BMW tuning.
And now we are happy to announce you BimmerEditor readiness!!!
Siemens MS41 module is fully maintainable now and we continue to research and develop for Siemens MS42 one. You will be able to buy new modules and integrate them into BimmerEditor when they are ready.
For our Early Bird users who will buy and provide feedbacks on application we offer 25% discount till the end of 2013. We will try to keep prices reasonable for community and expect to receive your feedbacks, success stories and errors reports to improve quality and extend feature set.
Please, send us your firmware in case when application cannot process it and Contact Support in case of uncertancy.
and remember, BimmerEditor is highly powerful tool to edit firmwares. You should definitely know what you are doing to avoid damage.
BIM-Tun team
BIM-Tune team was working persistently to create powerful editing firmware tool available for every fan of BMW tuning.
And now we are happy to announce you BimmerEditor readiness!!!
Siemens MS41 module is fully maintainable now and we continue to research and develop for Siemens MS42 one. You will be able to buy new modules and integrate them into BimmerEditor when they are ready.
For our Early Bird users who will buy and provide feedbacks on application we offer 25% discount till the end of 2013. We will try to keep prices reasonable for community and expect to receive your feedbacks, success stories and errors reports to improve quality and extend feature set.
Please, send us your firmware in case when application cannot process it and Contact Support in case of uncertancy.
and remember, BimmerEditor is highly powerful tool to edit firmwares. You should definitely know what you are doing to avoid damage.
BIM-Tun team
Hello all, 17/10/2013
Our product is almoust ready. There are some formal things to be completed and that is why product purchasing information is not here now but you can contact us directly and we will resolve request individually. Meanwhile you can go to gallery to see features application propose.
BIM-Tun team
Our product is almoust ready. There are some formal things to be completed and that is why product purchasing information is not here now but you can contact us directly and we will resolve request individually. Meanwhile you can go to gallery to see features application propose.
BIM-Tun team
Hello all, 18/08/2013
We are back from vacations and happy to inform you that we have tested following firmwares versions for Siemens MS41: 0641, 0659, 0912, 0941, 0959, 0960.
Nearest time we are going to publish screens and features the software has and full list of supportable maps. As soon as you have firmware with versions different from mentioned above just send it us and we will extend our support list.
Also we would like to introduce that you can create account here and be updated with information we have for you.
BIM-Tun team
We are back from vacations and happy to inform you that we have tested following firmwares versions for Siemens MS41: 0641, 0659, 0912, 0941, 0959, 0960.
Nearest time we are going to publish screens and features the software has and full list of supportable maps. As soon as you have firmware with versions different from mentioned above just send it us and we will extend our support list.
Also we would like to introduce that you can create account here and be updated with information we have for you.
BIM-Tun team
Hello buddy! 15/06/2013
Our BIM-Tun team actively develops independent BMW ecu firmware editor.
With our first release we are going to produce the module which supports Siemens MS41 (41.0, 41.1, 41.2) controller used with E36 320, 323, 328, M3(USA), Z3 2.0, Z3 2.8, E38 728, E39 520, 523 and 528 BMW models. We have noticed that there is no high-quality product in community for this controller’s family and it’s a good reason for start. Support for Siemens MS42, MS43, MS45, and all other controllers then, is planned in next releases.
First production release is coming soon and we are in product testing phase right now. Our team is highly interested to deliver reliable product and we are asking you to assist. Please, Upload your (MS41) firmware files to help us significantly in product quality assuring. We guarantee that your files will be used just for automatic testing and will be published nowhere.
To compensate your effort we offer Checksum Correction Service as a small contribution (you can treat this as a bonus) for you and community. You may Upload your file with incorrect MS41 firmware checksum and instantly obtain it back with corrected checksums. Use it for free!
BIM-Tun team
.. and yes, you are welcome to leave your feedback
Our BIM-Tun team actively develops independent BMW ecu firmware editor.
With our first release we are going to produce the module which supports Siemens MS41 (41.0, 41.1, 41.2) controller used with E36 320, 323, 328, M3(USA), Z3 2.0, Z3 2.8, E38 728, E39 520, 523 and 528 BMW models. We have noticed that there is no high-quality product in community for this controller’s family and it’s a good reason for start. Support for Siemens MS42, MS43, MS45, and all other controllers then, is planned in next releases.
First production release is coming soon and we are in product testing phase right now. Our team is highly interested to deliver reliable product and we are asking you to assist. Please, Upload your (MS41) firmware files to help us significantly in product quality assuring. We guarantee that your files will be used just for automatic testing and will be published nowhere.
To compensate your effort we offer Checksum Correction Service as a small contribution (you can treat this as a bonus) for you and community. You may Upload your file with incorrect MS41 firmware checksum and instantly obtain it back with corrected checksums. Use it for free!
BIM-Tun team
.. and yes, you are welcome to leave your feedback